Today, we will discuss the 6.4 Powerstroke delete kit. Moreover, we will also be discussing the problems related to the emission system after deleting it.
There are only a few problems with the delete kit. This means, most people never look back after removing the system. However, there are issues and they are visible. People tend to be victims of the issues and we will be discussing that today.
Moreover, we will be discussing the problems below about the 6.4 Powerstroke delete kit. Our guide also includes the perfect solution for the problem.
Dilemmas Related To 6.4 Powerstroke Delete Kit
Your vehicle might undergo several difficulties after you modify it. The factory manufacturers build their vehicles after having tons of meetings with the engineers. Moreover, they hire engineers just to make their vehicles perfect.
However, modifying the vehicle will hinder the quality and the intended purpose of the vehicle. Therefore, we have listed down the issues related to the 6.4 Powerstroke delete kit. You should keep in mind there are multiple issues related to the emission scheme.
The Engine Knocking
You will hear some unwanted sounds while driving along the road. You will hear a knocking sound under the hood. However, these sounds are purposefully done by the engine. Moreover, the car manufacturers tend to design the engine in this way to alert the owner if there is any mysterious crisis in the vicinity.
There can be multiple reasons for this engine knocking. However, you can blame the 6.4 Powerstroke delete kit for this particular problem too. Moreover, there are several more reasons behind them too.
Note that your car might suffer from several issues once you install the EGR kit. Further, this is enough to make your engine knock in the middle of the road.
There is a solution to this problem. All you need to do is remove the EGR kit. Once you are done with it, return your vehicle’s engine’s computer. This will make the computer read the EGR again. This was some information about the 6.4 Powerstroke delete kit.
Loss of Power
Have you ever noticed any power loss after you got rid of the EGR through the 6.4 Powerstroke delete kit? If yes, your vehicle is suffering from the problem due to the removal.
Older diesel engines used to have multiple flaws in the design. The engines used to break down in the middle too. Further, those engines get benefited from the EGR delete kit. The result was an immense bump in vehicle horsepower.
Diesel engines became more flawless along with time. Therefore, removing the EGR will not benefit your vehicle at all. So you are not even getting a bump in horsepower too.
The sad part of the story is your vehicle horsepower might drop rapidly due to the removal of the EGR. However, you will not experience this problem if your vehicle is old having that old diesel engine.
You have a solution for this hardship. All you need to do is put the EGR back in your vehicle. This will put everything back to normal again.
Universal Joints Broken
We all know there are some car speed lovers. The satisfaction of that horsepower kick when you press the gas pedal is immaculate. However, every car is built with a definite horsepower.
This means the chassis of the vehicle needs to withstand the force that the engine is producing too. However, tuning too much for power might result in broken universal joints.
When you delete the emission system of your vehicle, your tuner needs to bump up the vehicle horsepower. This will mess up the vehicle parts tolerance. Further, Your vehicle might fail to handle the extra power and result in a breakdown. This was some information about 6.4 Powerstroke delete kit.
Some Common Problems Due to Deleting The Emission System
You can delete the emission system by making your vehicle warranty at stake. It voids your vehicle warranty and this is a major downside due to the 6.4 Powerstroke delete kit.
Disrupting The Law
You are committing a crime by deleting the emission system of your vehicle. It is a severe crime and might result in a fine or prison. This is some information about the 6.4 Powerstroke delete kit.
The emission system was designed by the manufacturers to halt the production and emission of harmful toxic gases. Moreover, toxic gases are produced by the combustion engine.
Furthermore, toxic gases tend to harm the atmosphere by rising greenhouse gases. We all know greenhouse gases trap heat and will result in severe global warming. Therefore, it is illegal to remove the emission system. However, it is not mandatory to have an emission system in some places.
Therefore, we recommend you do some research regarding the removal of the emission system with a 6.4 Powerstroke delete kit in your country’s region. Avoid if it is illegal to remove. We will say to delete the emission system at your own risk.
We have said this earlier too. Removing the emission system removes the warranty of your vehicle. This means you will not get the free service from the car dealer who gave it.
Further, you have to take care of your car by yourself if it ever fails again. Your dealer will not take a look at it.
Needs Customized Programming
You are doing a severe chore by deleting the PDF of your vehicle. Moreover, you need to reprogram the engine of your vehicle to make it work again.
Further, there are tons of work to do for this process. And you need to set up specialized software for doing so. However, you might not know the process. For that, you need to contact your vehicle dealer.
Major Bump In Emission
Your vehicle is optimized to give the least polluted emission output. However, removing the emission system will severely cost emission results. There will be a severe bump in toxic emissions from the vehicle exhaust.
This will lead to toxic pollutants harming the environment. There are tons of questions related to this. Further, people are questioning the reliability of the system.
There are peoples those who have a headache to protect the environment and never remove the emission system. Further, this impacts their morals.
However, the decision is yours. You can be a hero by saving the environment. Or you can be the ultimate villain harming the environment by deleting the emission system.
Review Of 6.4 Powerstroke Delete Kit For 2021
People love the delete kits in the present day. This is because they hate the stock exhausts. Moreover, people prefer those bangy sounds from the exhaust. Therefore, you want one of the best 6.4 Powerstroke delete kits.
We have found one of the best 6.4 Powerstroke delete kits. This is from Mishimoto company and their service is just impeccable.
There are tons of advantages to this kit. So we have discussed them below.
It Protects The Oil Cooler
Vehicle manufacturers use oil cooling systems on high-performance vehicle engines. Oil cooling cools down the engine much faster than active cooling.
Now you can understand that oil coolers are vital on the 6.4 Powerstroke. Moreover, the engine would overheat immensely without the oil cooler.
However, there are downsides to oil cooling. The cooler develops sediments over time. This results in clogging and makes the engine vulnerable.
You need to take action against this before it starts harming the engine even more. The oil cooler should be cleaned and returned.
However, you can minimize the problem by installing a coolant filter system. This will filter out any dust from the coolant thus extending the life of your vehicle’s cooling path.
It Maximizes The Life Of Water Pump
The water pump is another vital system of your vehicle’s cooling system. Moreover, the pump forces the cooling fluid to flow through the cooling passage. This makes the cooling more efficient and working.
Your vehicle coolant should not get contaminated at any cost. Moreover, this will damage the water pump.
However, contamination of the coolant will lead to the sedimentation of coolant under the vehicle.
You should install a coolant filter system. This will remove any sediments or impurities. Further, this will give the water pump a better life span.
There are tons of talks related to the benefits of installing a coolant filter after removing the EGR emission system.
Further, you will always be benefiting from the coolant filter even after you remove the EGR system.
A Must Have For 6.4 Powerstroke
Your 6.4 Powerstroke is made with a sand-casted block. Therefore, it is highly likely that harmful pollutants will get be stuck in the motor.
Further, the sand becomes loose over time. This leads to the sand being stuck in several places resulting in blockage.
Moreover, it is a common issue on the 6.4 Powerstroke. Therefore, a coolant filter is an essential accessory to fit inside the engine. This will save the engine life and result in a smoother experience.
Preserves Engine To Be Healthy
The coolant filter kit is the ultimate way to protect your engine. Further, it protects the oil pump along with the oil cooler.
Your vehicle would suffer a tremendous amount of problems without their help them. Further, taking to the road would just remain a dream.
Moreover, your engine will just explode without the engine cooler. The engine will overheat resulting in severe hazards.
Therefore, you will be on the safe side by installing the kit and save the vehicle from failures
This kit is very priceworthy indeed. The cheap price along with impeccable service is mind-blowing. Mishimoto has made a masterpiece without any doubt! Further, the following kit well justifies its budget-friendliness.
Moreover, it is better to fit in a cheaper kit like this rather than replacing the damaged engine caused due to negligence.
So you might ask yourself, how can you delete the EGR on 6.4 Powerstroke. We have given the steps below.
How Should You Delete EGR On 6.4 Powerstroke
It is a tough challenge to install the 6.4 Powerstroke delete kit. However, we have tried our best to simplify the steps and process for you. Check below to know more about how to install the 6.4 Powerstroke delete kit.
Detach the battery
At first, you have to detach the negative terminal of the battery. Now follow it for the positive terminal too.
Caution- Never attempt to skip the step. This might result in severe accidents.
Dump the fluid inside the coolant
Make sure you have disconnected the battery. Now, you have to dump all the fluids from the inside of the coolant. There is a plug located under the radiator. Further, this is in the driver’s position. However, we advise you to put a bucket underneath while dumping. This will prevent fluids from getting scattered all over making the place nasty.
Remove ⅜ inch hose
You will notice a hose located around the degas bottle. Further, you have to remove the hose and keep it near you. Do not lose the hose as you will need it later.
Disassemble Up Radiator Hose And Battery From Drivers Position
In this step, you have to remove the radiator hose from the upper portion. You need to pop the clip of wire and pull off the upper radiator hose. Now, remove the battery, and you are done with this step!
Disassemble Vent Line And The Hoses
You have work to do here. There is a coolant hose on the degas bottle. You have to remove that hose and then remove the vent line that is located on the tray of the battery.
Now, remove both of them and you are good to go to the next step.
Make the hose clamp relinquish
There is an intercooler tube on the driver’s side. You have to make the clamp lose on the intercooler tube. However, you do not need to remove the tube itself. Even though, you have to make the rubber boot separate from it.
Discard the electrical connector and the deck of coolant
Did you notice the electrical wire on the EGR cooler? It is located on the top and you have to unplug it. Further, remove the coolant lines located on the vertical EGR cooler.
Moreover, remove every nuts and bolt that hold the coolers. Then, remove the mounting clamp and remove the coolers.
Take off the plastic coolant trench and the cooler
Help the intercooler very firmly. Now shift the EGR cooler to and fro. This will make you take it off. Now remove the plastic coolant tube.
Take out the radiator stocking and EGR cooler
Go to the thermostat housing and take off the radiator hose. Now take off the EGR cooler located on the upper side.
Take out the steering shaft along with fasteners
The clamps are located on the lower EGR cooler. First of all, you have to remove the EGR cooler and the upper radiator. After doing so, remove the steering shaft bolt and then the steering box shaft.
There is a nut that holds the dipstick tube. Locate that nut and remove it. Further, remove all the clamps located on the lower EGR cooler.
Disassemble the coolant shaft from the EGR cooler
There is a coolant line of the EGR cooler. You have to remove that coolant line. Now locate the EGR cooler’s back angle and disassemble all the nuts and bolts that are holding it. Now remove the EGR cooler itself.
Disassemble lower EGR cooler padlocks
There are bolts on the lower EGR cooler mount. You need to remove those bolts. To do that, you need to follow the line which joins the lower EGR cooler.
Fit in the fresh bolts and exhaust barriers
Now install the new exhaust blocks and the new bolts. You need to reverse the disassembling process.
We have listed some FAQs relating to the 6.4 Powerstroke delete kit.
Is the 6.4 Powerstroke durable after deleting?
The 6.4 Powerstroke engine is reliable after deleting the exhaust emission. Further, there is a bump in fuel economy after you delete the exhaust emission system.
The emission system is an absolute obstacle for your vehicle. This decreases the fuel economy. Therefore, deleting it will increase without a doubt.
Will my vehicle pass the inspection test after deleting the EGR emission system?
Sorry. Sadly, your vehicle will not pass the inspection test after removing the EGR emission system. The EGR emission system removes unwanted pollutants from your vehicle exhaust. However, deleting it will result in severe toxic gases in the atmosphere.
Will the deleting process bump horsepower?
Yes, it will bump up your vehicle’s horsepower. The DPF is very restrictive. Hence, removing it will allow better gas flow thus increasing horsepower.
Watch this video on Youtube:
6.4 Powerstroke Delete Kit – A Conclusion
Now you know about the 6.4 Powerstroke delete kit. There are several upsides along with downsides. Deleting the EGR emission system will harm the environment as it releases toxic pollutants into the atmosphere.
However, the work of EGR is to reduce the emission of toxic greenhouse gases from vehicle exhaust. These gases are produced in the combustion chamber.
Further, removing the system with the 6.4 Powerstroke delete kit will increase fuel economy along with a big bump in horsepower. Hence, if you are a speed lover, you will love it.