
Toyota Tacoma is a powerful truck without any doubt. The ultimate reason behind this is the mind-blowing performance of the truck and its humongous Horsepower. Altogether, there are some challenges that truck owners need to face. This is the primary cause for the publisher to offer today’s article about the best exhaust system for Toyota Tacoma.
Toyota offers an inadequate exhaust system with the Toyota Tacoma. Without any doubt, a great exhaust system does not provide excellent smoothness. It also enhances the powers and torque for more exceptional handling. Moreover, a great exhaust system also increases the pickup of one’s truck.
You might hear a rumbling sound from the exhaust system of Toyota Tacoma when you push the accelerator. If so, then you have to change the exhaust system of your truck with a fresh one.
We know you never want to buy an inappropriate exhaust system for your precious truck. Certainly, it will make conditions problematic rather than make them better. So we have picked up some of the top 10 (TEN) best exhaust systems for Toyota Tacoma to prevent you from buying the wrong product.
Comparison Table of The Best Exhaust System for Toyota Tacoma
10 Best exhaust system for Toyota Tacoma Reviews
1) Flowmaster Cat Back 17432 Exhaust System- Excellent Performance
Product Highlights
- Maximize performance with Dyno Tuning
- 16 gauge tuning mandrel bent
- Hangers and hardware included.
- Savage exterior sound exhaust system
This Flowmaster Cat-Back 17432 Exhaust System has a reputation for its minimal sound and silky driving experience. This Flowmaster cat black 17432 is famous as the best exhaust system for Toyota Tacoma.
The exhaust system is known for its increased track performance along with bumped Horsepower. Furthermore, the exhaust system lasts for a long time.
This particular exhaust system produces a soothing ear sound, which sounds just impeccable. In addition, the exhaust system is effective in removing air for optimal engine performance. Moreover, dyno tunes exhaust adjusts the fuel mixture automatically. Therefore, this is the best exhaust system among others that exist in the market for Toyota Tacoma.
Pros
- Better airflow allowance
- High durable
- Necessary hardware included
- Steel finish aluminum
- Enhanced throttle response
- Soothing sound quality
Cons
- The massive exhaust system, it is durable
Technically Speaking
- Brand name – Flowmaster
- Mass – 44.8 lbs
- Model – 17432
- Dimensions – 48.6 * 14 * 13.8 inches
2) MBRP S5338P Cat-Back 3 inches Single side Exhaust System
Product highlights
- On bolt installation
- Tone performance
- OEM hangers fit capability
- 3 inches tubing mandrel bent
The MBRP S5338P Cat-Back 3 Inches Single Side Exhaust System is made of aluminum alloy steel. Moreover, the exhaust system highlights completely sealed submits to maximize the longevity of the exhaust system.
Furthermore, this particular product is made to function while also reducing the body temperature of the exhaust. Therefore, it means a more excellent fuel economy along with enhanced performance.
The exhaust system is made along with other pro designs of MBRP. Certainly, this particular model checks all the spec sheet boxes needed for the itemized approved principles.
The unique muffler design, along with full mandrel bendy tube plus lower bend angles. Obviously, it makes this exhaust system the ultimate choice for most buyers. As a result, this is also one of the best exhaust systems for Toyota Tacoma.
Pros
- On bolt design for effortless installation
- Enhances fuel economy
- Superior quality material
- Full seal tubing
- A heavy-duty alloy of aluminum
- Necessary equipment included
- Direct appropriate OEM hangers
Cons
- Rust may happen
Technically speaking
- Brand – MBRP
- Mass – 55 pound
- Model – S5338P
- Dimensions – 46.5 * 16.8 * 12 inches
3) Flowmaster Cat Black 819144 exhaust system for Toyota Tacoma
Product highlights
- Installation materials included
- Mandrel bendy 16 gauge stainless alloy steel tubing
- Medium exhaust tone
- Lifetime limited warranty
Flowmaster Cat Black 819144 Exhaust System is made up of stainless steel support Systems. The product included a 2.5inches head pipe, which is flanged plus an inlet tube muffler. Moreover, it uses the laminar flow tech from Flowmaster.
This particular exhaust system has a tailpipe made up of excellent stainless steel for enhanced durability. The product approaches us, along with the hardware necessary for your effortless installation. The exhaust system provides moderate exhaust sound. Certainly, you can hear from the interior. Furthermore, the sound without a doubt will catch the expectation of the sound-loving drivers.
The exhaust system you can fit onto any wheelbase model, excluding the Stab Cab models and X Runner.
Pros
- Optimal performance
- Durable exhaust system
- Perfect fit
- Offers moderate sound from the exhaust
- Necessary hardware included
- Fast installation process
- Tube made of stainless steel alloy
Cons
- N/A
Technically speaking
- Brand – Flowmaster
- Mass – 38.5lbs
- Model – 819144
- Dimensions- 58 * 15.6 * 13.8 inches
4) aFe Power 49-46034 Exhaust System
Product highlights
aFe Power 49-46034 Exhaust System has sealed seams that give the ultimate protection against rust. This is to maximize the life span of the product.
The exhaust system has a black coat wrap-up. So you don’t need to fear extreme thermal heat or abrasion.
The exhaust system maximizes the airflow of your precious Toyota Tacoma. Maximize airflow reduces heat plus enhances the performance of your truck. Hence less thermal throttling. Moreover, these features mean that one does not need to worry about the reduced fuel economy anymore. One can enjoy the extraordinary performance of one’s truck.
The exhaust system undergoes severe phases of torture in their testing lab. Hence, you don’t need to worry about the quality issues of this product. They torture against harsh conditions such as extremely high temperatures and running hundred of mileage. This is to ensure that the product provides the business-standard. So, the product without a doubt is in line to come across Tacoma’s optimal sound.
Pros
- Aluminum steel alloy with premium-grade construction
- Long-lasting plus durable
- Easy installation process
- No modification required
- Can deal with a rough environment
Cons
- Loud, cold start
Technically speaking
- Brand – Gibson
- Model – 49-46034
- Weight – 35.8 lbs
- Dimensions- 48 x 14 x 13 inches
5 ) Gibson Stainless Steel 618814 exhaust system for Toyota Tacoma
Product highlights
- Rear tire exit
- Mandrel stainless steel bent tubing
- Internal drone
- Savage sound
- Polish stainless tip
Gibson Cat-back Stainless Steel 618814 is an excellent choice for owners of Toyota Tacoma. This exhaust system is for owners who are looking for a new exhaust system. It isn’t satisfied with the factory-built exhaust. Additionally, this exhaust system meets customer expectations without any hesitation. It is the perfect choice for owners who does hill drives or enjoys strength or just tows.
The exit of the exhaust is situated in the tail end of your vehicle’s rear tire. The sound is, without a doubt, just quite aggressive. This exhaust system has gone through a test that is known as the Dyno test. It is to prove that it can carry out impeccably with the maximum torque.
Moreover, the exhaust system offers an installation known as bolt-on fitting. Furthermore, it is a pro exhaust system and just looks impeccable. Without a doubt, this is one of the best exhaust systems yet.
Pros
- Savage sound system but quite enough
- Limited lifetime warranty
- No wielding installation
- Bolt-on installation
- Gives maximum Horsepower to truck
- Durable plus long-lasting
- Baffling design with chambered
- Impeccable fit
Cons
- Takes a long time for installation
Technically Speaking
- Brand – Gibson
- Mass – 35.8 Pound
- Model – 618814
- Dimensions – 48 * 14 * 13 inches
6 ) Borla Cat-Back 140680BC S-Type Exhaust System
Product highlights
- 3 inches cat black
- Mandrel-bent tubing
- OEM hanger fit
- No wielding installation
MBRP 3 inches S5340BLK Cat Back Dual Split Side Exhaust is an excellent performing exhaust. This particular exhaust features a sealed Seam to protect against any rust, thus enhancing its durability. Further, the exhaust of the black series from MBRP features a black coating finish. It holds exceptionally well against nasty situations and extreme thermal heat, which the exhaust usually undergoes.
The S5340BLK exhaust model has a great architecture design that minimizes truck temperature along with maximizing exhaust airflow. Furthermore, this means you will get excellent fuel economy. This also enables the system to carry out good and lasts for a long time—no doubt, this can be the best exhaust system for Toyota Tacoma.
This exhaust system is Dyno tested. So, it ensures that the exhaust system can withstand immense stress with maximum torque.
Pros
- Enhances fuel economy
- Seal resists rust
- Can withstand abrasive conditions
- Impeccable performance
- Bolt-on installing
- No welding required
- Necessary types of equipment included
Cons
- Its drone may get louder on 6th or 5th gear.
Technically speaking
- Model – MBRP
- Weight – 55lbs
7) Borla 140140 Cat-Back Stainless Steel Exhaust System
Product highlights
The S5322AL product from MBRP is a compact exhaust system. The material used is aluminum alloy steel. The exhaust system has completely sealed tubing to maximize the life span of the system.
This series is made of the same specs as any other MBRP pro series. Thus, it is made to perform. Furthermore, it will enhance the performance of the truck while carrying tons of loads. Fitting this exhaust will offer the truck more than 28 feet per pound of torque. Furthermore, it will also give increase horsepower of 18HP. Therefore, one will never experience a lag in performance anymore.
The exhaust will also give more back pressure as it can pass in more fresh and clean air. Hence enhanced thermal cooling and enhanced backpressure. Therefore, this is also the best exhaust system for Toyota Tacoma.
Pros
- Low weight
- Enhances fuel economy
- Bumps up torque and Horsepower
- Soothing exhaust notes
- Easy installation
- Tip made of stainless steel
Cons
- Some cutting might be required for simple access to the cab.
Technically speaking
- Brand – MBRP
- Model – S5322AL
- Weight – 30lbs
8 ) Flowmaster 817519 Cat Double Cab Exhaust System
Product highlights
- Tubing made of stainless steel
- 16 gauge mandrel bent
- Accessories are included for a painless installation.
- Exhaust system made of double cap
Flowmaster 817519 Cat Double Cab Exhaust System undoubtedly is made of 16-gauge stainless steel. Obviously, it is mandrel-bent tubing. This is trouble-free to install and gives extraordinary sound from the exhaust, all thanks to Flowmaster technology. However, this model, without any doubt, is impeccable for Toyota Tacoma 3.4L V6.
The Flowmaster 817519 has hardware as well as hangers for effortless installation. In addition, you get that exceptional horsepower bump from the Flowmaster exhausts.
Pros
- It comes from a trustworthy company
- Stainless steel made for enhanced longevity
- Dyno tested
- Perfect fit
- Accessories included for fast installation.
Cons
- Lacks mounting hardware and gaskets
Technically speaking
- Brand – Flowmaster
- Weight – 38lbs
- Model – 817519
9 ) Flowmaster 817719 Thunderkit Exhaust System
Product highlights
- Dyno tuned
- Tip made of stainless steel
- Delta flow tech
- Hardware inclusive for assembly
Flowmaster 817719 Thunderkit Exhaust System is impeccable. It is for those who want Exhaust Systems with aggressive sound from outside plus modest sound from inside. Furthermore, you will also get the flawless performance you expect from your exhaust systems.
This exhaust system has a magnificent 50 (Fifty) muffler and, at the same time, 2.50ʺ mandrel-bent tube, which divides into two 02.50ʺ tailpipes. Meanwhile, the exit part of the exhaust system has a stainless steel finish.
Moreover, America is a producer of this product. Hence, you will be able to enjoy a limited lifetime warranty.
Pros
- Mind-blowing sound
- Torque and Horsepower are enough
- Good performance
Cons
- The installation process might be difficult.
Technically speaking
- Brand – Flowmaster
- Mass – 0.32 Ounces
- Model – 817519
10 ) Borla Exhaust System 140680 is Excellent Sound
Product highlights
The Borla 140680 Exhaust System for Tacoma is famous for its impeccable sound. And it has a humongous amount of power. The feeling of the gear transmission and combustion engine smokes from the exhaust gives you a new level of satisfaction and feelings. Therefore, it is an excellent exhaust that you expect from a product of its category.
This exhaust has undergone several tortures. So it makes us sure that it meets the quality standards. You also get a soothing feeling from the sensory feedback of the sound of the exhaust system. It is just another level of technology that you need to use to understand. Therefore, do consider this as one of the best exhaust systems for Toyota Tacoma.
Pros
- Impeccable sound
- Impeccable fit
- Not unbearable loud
- More efficiency
Cons
- Installation might not be that easy!
Technically speaking
- Brand – Borla
- Model – 140680
- Weight – 36.2 lbs
FAQs About Toyota Tacoma Exhaust
01 ) Are all exhaust systems the same?
No, all exhaust systems are not the same. Some exhaust systems are tuned to make a loud sound, and some are optimized to make a low sound. If you are an exhaust sound lover who loves the growling noise, you should go for an exhaust system that produces a loud sound or vice versa.
02 ) what is dyno tuned for the exhaust system?
Dyno tuning is one of the safest and easiest ways to get bumped-up power for your vehicle. A dyno-tuned exhaust system is a better option to buy!
03 ) If the muffler goes bad of Toyota Tacoma, what should you do?
A muffler is a critical part of Tacoma’s exhaust system. It reduces the noise created by the internal combustion engine. Moreover, this is a noise-killing device, which is also called a silencer. Without a muffler, the noise emitted by the exhaust might be more than what is stated by the law; hence you might end up getting fined by the police!
04 ) what is the critical point to consider before buying an exhaust system?
Here is a tip. If you are a loud bang-bang person, go for small exhausts. This is because the lower the exhaust system, the louder it will produce sound.
Buying Guide of Tacoma Performance Parts
Before you purchase any aftermarket exhausts, consider our buying guide below. There are three types of customers in this sector of the exhaust system:
1 ) Sound loving customers
If you are among those who love the sound, always go for the small exhaust systems. A small exhaust system generates a much louder sound than an extensive exhaust system. It would help if you bought a muffler for your exhaust, which produces loud high satisfying notes. The specifications are on the product description page. Check if the exhaust produces a high sound or low sound notes.
2 ) Fuel efficiency lover customers
Most customers change their stock exhaust systems for fuel efficiency by fitting them with aftermarket exhaust systems. Always check the product description to see if the Exhaust system saves fuel. Some exhausts might drain more fuel rather than save. Hence always be careful before you buy!
3 ) Power loving customers
This is mostly for young youths who love power. Although your vehicle comes with adequate power, you might need more. You might be desired for an exhaust system that will bump up your car’s horsepower and torque. Therefore, it is advisable that for you guys, that you buy an exhaust system that is dyno-tuned.
Before you buy any exhaust system, always do consider if they give warranties. Let’s face it, and the aftermarket exhaust system might not be as perfect sometimes. There might be manufacturing faults; hence it is better if the product comes with a warranty.
If you are someone who takes their truck on the beach or off-road drive, please check if the after-the-market exhaust is rust-resistant. This is because if it is not rust-resistant, the exhaust will soon be damaged, and you will need to change it again! So better to check before buying as this will save both money and energy.
Conclusion
The truck is an essential part of life for those who tow or goes for a hill climb with their vehicle. Tracks are for cargo lovers. However, the Tacoma truck is one of the best tracks out there today. But get the fact it doesn’t come with the best exhaust system. In today’s market, there are various types of exhaust systems. So to prevent you from tricking out, we have given you some of our custom-selected products from various manufacturers. Hopefully, this article will ease your buying process of the best exhaust system for Toyota Tacoma.
Moreover, if you need a trusted brand, we recommend you go after Flowmaster. Hopefully, we were helpful to you—Good Luck with your new exhaust system!
Read More: A Complete Guide on Shocks and Struts Replacement Cost
[…] a) Best Exhaust System for Toyota Tacoma. […]