Reliability is an essential part of all vehicle engines. The ford 6.2 engine is one of the reliable engines out there in the market today. Further, they aren’t new in the industry and gave service for many years. However, there might be some problems with the Ford 6.2 engine.
There are different types of problems. Some of them are inexpensive. Whereas some might hurt your wallet a lot. Further, this might become an annoying subject and interrupt your daily routine life. You do not want to be stuck with a problematic engine while being late for the office!
Therefore, we will be going through Ford’s 6.2 engine problems today. Further, we will be guiding you on how to troubleshoot those problems and save as much money as you can. Moreover, we will be giving you an estimate of how much money you will need to repair each of the engine parts.
However, you should know first how well is the ford 6.2 gas engine. Let us discuss them below.
How Well is The Ford 6.2 Gas Engine?
There is a new generation of 7.3-liter engines that ford has released recently. Therefore, it is much easy to ignore the ford 6.2 gas engine as it has grown much older.
However, we should not forget the 6.2 gas engine as this gave the ultimate reliability for the owners.
We have tested the ford 6.2 gas engine several times. The result might astonish you that it hardly ever broke down.
Moreover, you can fix those small problems by referring and searching on goggles for some help. The ford 6.2 engine is the ultimate champ if you compare it to its predecessor like the 5.4-liter engine.
Therefore, you can say that the ford 6.2-liter engine is one of the best options for ford owners that have been in the industry for some time now. The major advantage of this engine is its ultimate reliability as you will hardly be facing any problems with it.
However, this doesn’t mean it is all perfect. There are problems and you should be prepared to solve the Ford 6.2 engine problems. We have discussed some of the problems along with the solution below. Have a look at them!
Obvious Reasons Of Failing 6.2 Ford Engine
The vehicle engine is one of the most complicated technology. There are tons of engineering out there. Moreover, there are more than 2000 moving parts in an internal combustion engine or ICE.
It is obvious those multiple moving parts will suffer from some kind of problem as days pass by. Therefore, it is important to learn about the basics and the problems of the engine. This will prevent you from getting in trouble over time during unexpected situations.
This means you will know instantly the problem to any issues if you ever run into one. Therefore, you just need to understand the engine more.
Further, you will be able to save tons of cash by solving the problem on your own rather than visiting a car mechanic who will charge you more.
Below, we have given some of the reasons for a failing Ford engine. Take a look at them below.
The first thing that comes into mind is rough idling. However, this is really hard to say what is causing it as there might be tons of reasons behind it. The most common reason for this is an unclean air conditioner.
Problematic valve gasket is another issue for the ford 6.2 engine. You just need to replace the valve cover gasket whenever you see any oil leakage from it.
A faulty valve spring is another issue with the 6.2 gas engine. This problem occurs often to the owners. You will hear a loud sound if you have broken the valve spring. Further, the car will make loud sounds that are noticeable.
Oil burning also comes on the list for engine faults. However, you will just need to replace the PCV valve if you are very lucky. This is because the PCV valve is very cheap and easy to find.
We cannot end our list without this problem. It’s obvious, right? Vacuum leakage is a minor problem for your ford 6.2 engine. Your vehicle will be surging when idle if this is a problem for your engine.
Now you know some of the most common Ford 6.2 engine problems. However, we haven’t gone through the solution yet. Now, we will be discussing the solution to all these five problems listed above.
Solve of Ford 6.2 Engine Problems
Are you the one who is trying to fix your vehicle’s engine problem on your own? You will be glad to read below to know how to solve the ford 6.2 engine problems.
However, the cost estimation depends on how badly your Ford’s engine has been damaged. You will need to burn tons of cash if the engine has been poorly damaged. Further, things might turn cheap if the engine has been damaged lightly.
The solution depends on the level of engine damage. Further, it might be as easy as replacing an engine valve cover gasket. This is very easy to remove and install a new one. Moreover, this is very easy too. Therefore, you just need to diagnose the main problem for your ford 6.2 engine.
Has your vehicle ever stalled when you have come to a stop? If yes, there are tons of reasons behind this problem. We have listed some of the engine stalling reasons below.
- A problematic spark plug
- Polluted air system
- Polluted throttle
- Leakage of vacuum
These four issues are the most obvious ones. However, the most common problem is the dirty air system. Oil and water might get into the system causing contamination. This will make the engine of your vehicle run poorly and show a drop in engine performance too.
The solution is very simple in most cases. You just need to purchase a throttle body cleaner which will cost you around $8. We have given below what you need to do.
The first step is to take off the hose that is located on the airbox.
Take a look at the labels before using the spray. This will prevent you from misusing it.
Note that your vehicle will shut down when you use the spray. However, keep someone to make sure the vehicle is turned on.
Now keep the engine running and start spraying inside the hose. This will clear out all the dust that is present inside the system.
Now lift the airbox and take the filter out.
Now you need to unplug the airflow sensor and spray inside it with a bottle cleaner.
You are done with your work. Now you need to put place everything back as it used to be before.
Sure, the process takes a bit of your precious time. However, we can assure you that the time will be worth it.
This was the solution to the first problem of Ford’s 6.2 engine problems.
Now, let us discuss the fix about a broken spring valve.
Damaged Spring valve
Truck drivers drive a lot everywhere. Further, off-roading with a truck is a different joy. Moreover, ford engines are so powerful that they were made to run. However, things might not go as intended and things might break down at a point.
One of the most important breakdowns of ford 6.2 engine problems is the broken spring valve. Moreover, a broken spring valve might cause severe problems to the engine and cause malfunctioning over time.
Whenever you turn on your truck, did you ever hear a horrible sound coming from the engine hood? This is because of the broken spring valve inside the engine. The sound is nasty and irritating causing problems.
However, what will happen if you do not fix the problem and your vehicle keeps on running? The engine of the ford might be damaged severely over time. Further, this might cost you tons of money and you do not want that to happen. Moreover, it is better to be safe than sorry.
Therefore, the best way is to replace the broken spring valve. You will need some tools which we have listed below.
- A valve spring compressor along with a drill will be used to remove the rocker arms.
- You need a magnet that will be used to remove the keepers along with the ratchet.
- Finally, you need air pressure.
Below, we have given the steps on how can you replace the broken valve spring.
- Switch off your vehicle.
- Open the vehicle hood.
- Take photos to remember which equipment remains in which place.
- Take off the valve cover and take off the rocker arms.
- You will need drills to remove it.
- Now, remove the guide plates along with rods.
- Use the air pressure to take off the valves.
- Use the valve spring compressor to take off the valves.
- Keep the valve spring compressor holding down and use magnets to take off the keepers.
- Now, remove the broken spring valve and replace it with new parts.
- Repeat the process in a reverse way to get back your vehicle.
Below we have given the steps on how can you fix the vacuum leakage.
First, make sure your vehicle engine is cold, or else you might end up damaging the engine.
Take off the vacuum hose from where you think the leakage is from.
Now replace the faulty hose with the extra hose that you have.
Light up a cigar and blow some smoke inside the hose.
Now, look at the engine and trace where the smoke went from the hose.
Now, put back the hose after locating where the smoke is coming from. Moreover, that particular hose was causing the vacuum leak. Put it back and it will be fine.
High Fuel Consumption
Your ford 6.2 engine might consume more fuel than average. This might be problematic as you will get very low gas mileage. Further, it will become very costly for you to take the vehicle for any tour as you need to refill the fuel tank often. There are tons of reasons behind an unusual fuel consumption.
We recommend you show it to your vehicle mechanic. There might be tire pressure problems or even broken shock absorbers. However, there might be other problems too.
Now you know all the ways you can fix the ford 6.2 engine problems. However, how much does each repair process cost? Let us see them below.
Watch this video on Youtube:
What is The Cost of Each Ford 6.2 Engine Problems?
Let us discuss the cost of each of the problems related to the Ford 6.2 engine.
A tensioner replacement costs around $50 to $80. However, the labor cost is around $ 140. Now add up the money. That’s the total cost of Tensioner Replacement.
A new valve cover gasket will cost around $30 on amazon. Further, the car mechanic will cost you around $ 200. In total, you might end up spending $250.
Damaged PCV Valve
A PCV valve will cost you around $10. However, things might go as high as $15. In total, you might spend around $150 on labor costs.
Valve Spring Replace
This will cost you around $200. Further, a mechanic might cost around $1000.
A Cam Phaser will cost around $900 along with the labor cost.
Now you know all the costs for each one of the Ford engine problems. You might have some questions in mind. Therefore, let us dive into the frequently asked question.
How many miles does a ford 6.2 engine last?
It depends on how you maintain your vehicle. Moreover, you can drive as high as 3 lac kilometers.
Is the ford 6.2 engine good?
According to our research, yes the engine is very reliable.
Now you know all the things about Ford 6.2 engine problems. There are five basic problems with this engine. We all know how reliable the ford 6.2 engine is. However, nothing is perfect and everything starts to show its age at a certain point.
We believe, proper maintenance will extend the lifespan of the engine of your vehicle. Do not attempt to drive your vehicle with a faulty engine. This might end up in severe damage along with time. We recommend you check the engine by talking to a car mechanic every two months or so.