
Are you wondering how to replace car speakers? Listening to music during a long drive is highly relaxing. However, the quality of the music completely depends on the speakers in the car. There are instances, where the quality of the speakers is not up to the mark. They may even be damaged. In either of the cases, you would surely want to replace the speakers. To replace speakers, you need to follow certain steps. Why? Because improper installation can lead to problems in the long run like the rattling of the speaker. Installing speakers by yourself is a great way to maintain the budget. In this blog, we will discuss the correct method of how to replace car speakers.
Meanwhile, check out our other best automotive product list on the best Grille Guard for Deer, the best double din head unit, the best tuner for 6.7 Cummins. Like car speakers, they are also crucial parts of your vehicle. These product guides will benefit you immensely.
How to replace your car speakers?
How to change car speakers easily? Here are some tools required for how to install car speakers.
- Screwdrivers
- Wirecutter
- Electric tape
- Panel opener
- Extra wires and ports
- Iron soldering
- Drill machine
- Hobby knife
How to install car speakers step by step
Here we will discuss how to install car speakers on step by step guide. Let’s start.
Panel
Firstly, you must carefully remove the panel of the car. Yes, for that you must use a panel opener. Make sure that you don’t break the locks of the panel. Why? Because you have to reinstall them. Carefully and slowly remove the panel to prevent any damage.
Identify
Identification is the most important step in how to replace car speakers. After opening the panel, you must identify the wires of the speakers. You surely don’t want to touch a wire of any other circuit. Let’s taken an example. Assume you fail to identify the wiring of the circuit and damage the wire of other important circuits. In that case, you may even face issues during driving the vehicle. How can you identify the speaker? You will observe a box-like structure, which is called a bracket. The speakers are installed in them. Most importantly, the wire of the speaker is the one, which is attached to the bracket.
Dismantling
Now you know the actual position of the speakers. You need to unscrew the nuts and bolts using a screwdriver or a drill machine. “Make sure that you keep the nuts and bolts safe, as they are necessary to install the new speakers.” Take out the bracket carefully, without damaging the wires around it. The front of the speaker would be visible now. You will observe the speaker to be screwed in the bracket. Unscrew them carefully, and keep the bolts safe. Take out the speaker from the bracket. Remove the two wires connected to the speakers, but keep them separate from other wires. In short, this completes the dismantling process of the speaker.
Installation
Take out the new speakers and connect the wires to them. How? Which wire to connect where? “The wider wire is the positive terminal, while the narrow wire is the negative terminal.” Make sure that you connect them properly. You may even solder them for higher durability. Inspect the wire for any crack, or any other issue. In case of a crack in the wire, you must cover it with electric tape. Why? Cracks in the wire are the main reason behind the noise in the sound. So, these cracks can even damage the speaker in the long run.
Reverse the process
The final step includes repeating the steps in reverse. First of all, you have to screw the speaker to the bracket tightly. Now, place the bracket back to its original position. Make sure that no wire is strained. Put the correct screws and tighten them up properly. Let us say that the screws are not tightened properly. What worse can happen? In that case, the speakers will rattle, when you use them. This may even damage the wires around the speaker. In the end, you will have to pay a lot more than expected to fix everything. At last, place the panel carefully, and lock it tightly.
Tips for how to replace car speakers
When it comes to how to replace car speakers, efficiency is an important factor. In this section, we will discuss the most important tips for the perfect replacement of car speakers. Many ask us how to replace car speaker wires? However, all these tips were chosen based on our intense research and experience with car speakers.
Dimensions of the speaker
First of all, you must make sure that you choose the correct set of speakers. Do not uninstall the existing speakers, until you buy the new set. How can you choose the perfect set of speakers? Simple, measure the dimensions of the existing speakers and the mounting plane. You need to know the diameter, mounting depth, and height of the speakers. Now, you must make sure that the new set has a similar size. Let us say that they are larger. In that case, you must make sure that the mounting plane has enough size. However, the mounting depth and height should be the same as the existing ones. Overall, the new speakers must fit perfectly in the car.
Quality of the speakers
There are two conditions, in which you would want to replace the speakers. First, the existing speakers got damaged or are not working properly. Secondly, the quality of the sound cannot match your expectations. As per the first case, you may want to get similar speakers to the existing ones. However, as per the second case, a better set of speakers. Let’s take an example. Assume that the car has in-built 5 x 7-inch speakers. You are not comfortable with the level sound. In that case, replacing them with 6 x 9 inch, or woofers can be a great solution. Therefore, you must make sure that you choose high-quality speakers for the car. As a result, choosing based on the brand of the speaker can be a good approach.
Prevent damage
Throughout the whole process, you must keep an eye on every component. Make sure you do not damage anything while uninstalling or installing the speakers. The wires are the most sensitive part of the replacement. Do not leave any naked wire under the panel. What if you do? In that case, there can be short-circuiting, which can damage the speakers. Moreover, it can also affect the quality of the sound through the speakers. Lastly, you must make sure that you tighten the screws properly. Further, a loose speaker may damage the internal components of the car.
Conclusion
These were the easiest steps to replace car speakers. Of course, there are many other methods, but these require the least effort. Let us recap. You must gather the necessary equipment before uninstalling the speakers. Remove the panel carefully, without affecting the locks in it. To do that, you must use the panel remover. After that, identify the bracket and the wires of the speaker. Further, you may even mark them to prevent confusion. Carefully remove the bracket and unscrew the speakers. Also, keep the nuts and bolts safe in a box. Unplug the positive and negative terminal connected to the speakers. Now, connect those terminals to the new set of speakers. Tighten the speaker and bracket properly. Make sure that the speaker does not rattle, during driving the car. To sum up, Place the panel back to its original place, without damage the wires or other components.
You can read our next article on How to get birds out of Garage?
Hi, it’s Md Anwar H.
CSE (Computer Science & Engineering) & MSC from Port City International University.
Working infield of WordPress, eCommerce Develop, SEO, Digital Marketing, Google AdSense an Affiliate Marketing Since 2010.
Online Certifications:
Bootstrap, JavaScript & PHP.
Google AdWords/Google Ads Display.
Google Analytics.
SEO.
Digital Sales.
Leave a Reply