
One of the most anticipated questions on the internet is how to start Dodge Ram 1500 without key. Even though the following question is highly asked, there are few to no answers on Google regarding this.
You might have lost your RAM’s fellow key. You might have left it in the coffee shop, or anywhere in the market. Furthermore, you might have even dropped the key from your pocket for any reason. However, who cares what happened with the key!
Today, you are lucky enough because you will be able to know how to start Dodge Ram 1500 without key. It was hard for us to find ways. After thousands of research work, we finally have done it.
In this article, you will know how to start Dodge Ram 1500 without a key. Plus, you will also learn some additional features. Now, what are you waiting for? Go ahead to expand your knowledge.
Below are the tips and tricks on how to start your truck without a key.
Check Out More: The Best Cold Air Intake for Ram 1500.
Tips & Tricks for starting Dodge Ram 1500 without key
Igniting using the steering column
The first thing you will do once you get inside the car is a seat on the driver’s seat. Once you have settled yourself properly, grab the steering column. Detach the plastic covering the column. Doing so will reveal all the useful parts and pieces you need.
Trace the wiring harness connector after you have successfully removed the plastic covering mentioned above. Tracing the wiring harness connector can be difficult sometimes. It can be difficult if you do not have any idea what you are doing. Furthermore, not knowing what you are looking for can also make the process difficult.
Occasionally the harness connector is located on the center of the steering column. Don’t be confused with the windshield wipers and headlight harness connector. Those two connectors are located on any one of the corners of the column. To avoid being confused, look at the center. No left, no right.
Now look for a brown or yellow wire. Those color codes are for ignition wires. Then look for the red wires. Those wires are linked to the battery.
How to start Dodge Ram 1500 with ignition wire
After you have found the battery wire successfully, remove some insulation. At least remove an inch of insulation with the help of a knife or any sharp object. Finally, twist the wires together after exposing them to insulation.
Remember the ignition wires? What you need to do is link the ignition wire on/off the wire to the battery wire. You do that by twisting both of the wires together.
Now strip the starter wires about half an inch. Do wear plastic hand gloves before doing this to prevent any electric shock. Finally, after removing the insulation from the starter wires, touch those exposed areas with the exposed areas of the connected battery wires.
Eventually, your car will start its ignition. Do rev the engine to prevent engine stalling. Your vehicle will finally start running. But did you notice that your steering wheel is still locked?
So you need to unlock the steering wheel. There are many ways of unlocking the steering wheel. The process below is more straightforward and requires no experience. That means you do not need to be an expert to open the steering wheel. What you will need are a drill and a screwdriver. That’s all—no additional kit or accessories.
Read further about how to start Dodge Ram 1500 without a key to learn how to unlock the steering wheel without a key.
Unlocking Steering Wheel Using Drill & screwdriver
Open the keyhole inside of the steering wheel. You can open it by breaking the metal keyhole. This will eventually free the spring from unlocking the wheel. Or you can try rotating the steering wheel hard clockwise and anti-clockwise. Doing so will break the pin, which locked your wheel. And you are done!
This is one way of starting Dodge Ram 1500 without key.
If your RAM is manufactured after 1990, then follow the process below.
The Other Ultimate Way To Start
What you need in this process are a strong screwdriver and a drill. This process is much easier than the previous process and requires less skill. Furthermore, this process should work with any vehicle. The first process would only work with the 1990 Dodge Rams. Read more to know about the second process.
First thing- first. Insert the drill inside the metal keyhole. You should insert about three-quarters of the drill. Now embed a drill and don’t be gentle with it. Roughly remove and insert the drill as many times as possible. start your blog
Finally, when you get the feeling that the pins inside the wheel are all broken, remove the drill. Now insert the screwdriver inside the keyhole, and your Dodge Ram 1500 will start.
Note that any process you do will harm your car. You will have to replace certain parts after you have done this action. This action is not for an experimenting process. You will be responsible for any harm you do in your car.
Furthermore, it is advisable not to perform the such activity if your car’s model is 2010 or above. New vehicles are equipped with push-start technologies that are more advanced than those keyhole technologies.
How to Start Dodge Ram 1500 without a key fob
Additionally, we have added this section to let you know about starting dodge ram with a key fob. So, you now know how to start to dodge ram 1500 without a key but do you know how to start it without a key fob? We will inform you about it. First, When your battery dies, you have to unlock your vehicle. For that, you need to slide over your key fob & pull out the existing key. With it, you can unlock your vehicle. Then take it near the engine start-stop feature of your vehicle. Push the key fob against it and see the magic!
Conclusion
So by now, you know how to start Dodge Ram 1500 without a key. Let’s summarise the process below.
You can either use the steering column process or the drill & screwdriver process. We would advise you to take the drill & screwdriver process into account. The first process is much more complicated and requires experience. The second process is easy and will require less stress from your head.
At the end of the day, the choice is totally yours which process you choose. The first process will most likely fail if your car is newer than the 1990 model.
Remember not to do such kinds of actions if you are not in trouble. If you need to go somewhere emergency like a hospital or important client meeting, and you have lost your key, then you are welcome to do so. If not, then we highly discourage this process.
Avoid the presence of any kids while doing this. Also, remember if you are mature enough, then do this process.
Thank you for visiting our website and considering our pieces of advice. This is all for today.
You can read our recent review on How to adjust emergency brake on Chevy Silverado.
Hi, it’s Md Anwar H.
CSE (Computer Science & Engineering) & MSC from Port City International University.
Working infield of WordPress, eCommerce Develop, SEO, Digital Marketing, Google AdSense an Affiliate Marketing Since 2010.
Online Certifications:
Bootstrap, JavaScript & PHP.
Google AdWords/Google Ads Display.
Google Analytics.
SEO.
Digital Sales.
Leave a Reply